Mounting Instructions:

​

1.      Using the screwdriver bit taped to the interior of the sign, remove the four tamper-resistant fasteners from the outer edge of the sign and frame. Set these fasteners aside, because you will need them to complete the installation. The frame is now loose from the sign front.

 

2.      Take the frame piece in hand and determine level placement using a spirit level. Trace with a pencil at least four holes to mount the frame to the wall. Choose appropriate wall fasteners (not provided) for your type of wall to attach the frame to the wall. Take care not to cause the frame to warp during installation because of an uneven wall. If the frame is not flat, the sign will not align to the frame. If necessary, use stainless-steel washers (not provided) to adjust for uneven wall surfaces so the frame remains flat.

 

3.      Place sign over the frame and secure with provided tamper-resistant fasteners and screwdriver bit. Use only hand-tools when securing sign to frame. Warning: Over-tightening can distort the sign edge.

 

4.      Store the screwdriver bit in case you choose to move your sign or need to tighten the fasteners.

 

​

​